PVC Blowing Agent

SHIVAM ADHESIVE PVT. LTD. is engaged in the manufacture and export of superior quality PVC Blowing Agent that is also reckoned as Azodicarbonamide (ADC) in the industry. Our Rigid PVC Blowing Agent is widely used in Rubber, PVC, footwear and Plastic industries. It is commonly used for the expansion of PVC, natural and synthetic rubbers. We make them available in different ranges such as Micro Foam ADC-L5 and Micro Foam ADC-F2. In addition to this, we are counted as one of the major Azodicarbonamide Manufacturers and Exporters.

Product Details
Chemical Name : Azodicabonamide
Another Name : PVC Blowing Agent (ADC)
Chemical Structure : NH2 CON-NCOH2 N
Packing :25 Kgs
Moleculer Weight : 116.08
CAS No. : 103-77-3
EC No. : 204-650-8

Click Here For More Details of Shivam (ADC)

Click Here For More Details of Shivam (Modifiers)

Azodicarbonamide + Modifiers (ADC-L)

Product	Micro Foam - EV	Micro Foam - PT
Chemical Structure	C5 H10 N6 O2 CAS Number {101-25-7} MoL WT. = 186	CM5 H10 N6 O2 CAS Number {101-25-7} MoL WT. = 186
Gas Content	Mainly Nitrogen & Carbon Monoxide	Mainly Nitrogen & Carbon Monoxide
Appearance	Creamish Yellow Fine Powder	Creamish Yellow Fine Powder
ph (5% aqueous suspension at 25oC)	8.0 ± 1.0	8.0 ± 1.0
Moisture Content	0.5 % W/W Max	0.5 % W/W Max
Mesh Size (+300) BSS	0.1 % W/W Max	0.1 % W/W Max
Decomposition Temp. (Open Capillary Tube Method)	125oC± 5oC	125oC± 5oC
Gas Evaluation	125± 5 ml/gm @ S.T.P.	125± 5 ml/gm @ S.T.P.

Application
MICROFOAM-EV & MICROFOAM-PT can be used more safely than Di-nitroso Pentamethylene Tetramine. MICROFOAM-EV & MICROFOAM-PT is a Chemical Blowing Agent in powder form for the production of Cellular Products based on thermo plastic resin such as EV Co-Polymers. PE, is recommended for compression moulded Shoes, Slippers & Packing Sheets.

Special Features
MICROFOAM-EV & MICROFOAM-PT leaves very little residue. The residue is odourless, non discoloring type and does not impart colour to the finish product. MICROFOAM - EV-PT disperses easily in Polymeric compositions resulting in a fine uniform cell structure.

Dosage
5 – 8 PHR depending on the polymers used & extent to expansion required.

Packing
MICROFOAM-EV & MICROFOAM-PT is also packed in 25 Kgs. HDPE woven bags/ UN approved corrugated paper cartons with a polythene liner inside.

Flammability
MICROFOAM-EV & MICROFOAM-PT is non flammable and does not support combustion. Decomposition of MICROFOAM-EV & MICROFOAM-PT heating causes evolution of fumes resembling smoke. In case of Fire, use plenty of water, dry powder.